Hydraulic Poppet Screw-in CARTRIDGE / SOLENOID VALVE # SV16-21 Eaton



New other (see details)

New Hydraulic Poppet Screw-in CARTRIDGE / SOLENOID VALVE # SV16-21, no name and no box but was in large Eaton box, most ar wrapped in plastic with red plastic cap inside,

A solenoid-operated, 2-way, normally open, piloted poppet-type, screw-in hydraulic cartridge valve designed for low leakage in load-holding or blocking applications.

When de-energized, the SV16-21 allows flow from 2 to 1, while flow from 1 to 2 is severely restricted. When energized, the valve closes, blocking flow from 2 to 1. In this mode, flow from 1 to 2 will be allowed after overcoming the solenoid force. This requires 3.4 to 10.3 bar (50 to 150 psi).
Operation of Manual Override Option: To override, push and hold override button.

• Continuous-duty rated coil.
• Hardened seat for long life and low leakage.
• Optional coil voltages and terminations.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Unitized, molded coil design.
• Manual override option.
• Optional waterproof E-Coils rated up to IP69K.
• Industry-common cavity.

Operating Pressure: 207 bar (3000 psi); Under certain conditions,
this valve may be used at higher pressures; consult factory.
Proof Pressure: 345 bar (5000 psi)
Flow: Up to 132 lpm (35 gpm)
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 207 bar (3000 psi)
Temperature: -40 to 100 °C (-40 to 212 °F) with standard Buna seals
Coil Duty Rating: Continuous from 85% to 115% of nominal voltage
Initial Coil Current Draw at 20 °C: Standard Coil: 1.67 amps at 12  Vdc;
0.18 amps at 115 Vac (full wave rectified).
E-Coil: 1.7 amps at 12 VdcC; 0.85 amps at 24 Vdc
Minimum Pull-in Voltage: 85% of nominal at 207 bar (3000 psi)

Fluids: Mineral-based or synthetics with lubricating properties at viscosities of
7.4 to 420 cSt (50 to 2000 sus); See Temperature and Oil Viscosity,
Installation: No restrictions;
Cavity: VC16-2;
Cavity Tool: CT16-2xx
Seal Kit: SK16-2x-T;
Coil Nut: Part No. 7004420


SV16-21 Performance Chart



SV16-21 Valve Dimensions


Cartridge: Weight: 0.31 kg (0.69 lb); Steel with hardened work surfaces. Zinc-plated exposed surfaces; Buna N O‑rings and polyester elastomer back-up standard.

Standard Ported Body: Weight: 0.57 kg (1.25 lb); Anodized high-strength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi); Ductile iron bodies available; dimensions may differ.

Standard D-Coil: Weight each: 0.27 kg (0.60 lb); Unitized thermoplastic encapsulated, Class H high temperature magnet wire.

E-Coil: Weight: 0.41 kg (0.9 lb); Perfect wound, fully encapsulated with rugged external metal shell; Rated up to IP69K with integral connectors.

Location // Bread cart